Vanne papillon d'eau Elephant WBV3232P-2W-Fb-H, matériau du corps - acier inoxydable AISI 316L, matériau du disque - acier inoxydable AISI 316L, joint - PTFE, avec actionneur pneumatique double effet PA-DA, 4V320-08 220V, BKV APL-210N
Vanne papillon d'eau Elephant WBV3232P-2W-Fb-H, matériau du corps - acier inoxydable AISI 316L, matériau du disque - acier inoxydable AISI 316L, joint - PTFE, avec actionneur pneumatique double effet PA-DA, 4V320-08 220V, BKV APL-210N - DN100 / 16 bars est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Impossible de charger la disponibilité pour le Service de retrait
Livraison et expédition
Livraison et expédition
Les frais de livraison sont déterminés lors du processus de paiement et varient en fonction de plusieurs facteurs, notamment le type de produit, le délai de livraison, le fournisseur de services et le pays de destination.
Description
Description
The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic double-acting rotary actuators PA-DAXXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.
The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off device: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. The visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
Technical parameters of Water Butterfly Valve Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| Nominal diameter DN, mm | 40 - 300 |
| Nominal pressure PN, bar | 16 |
| Flow direction | double-sided |
| Working medium temperature t, ⁰C | -20 to +85 for NBR |
| -20 to +120 for EPDM | |
| -10 to +180 for PTFE | |
| Ambient temperature t, ⁰C | -40 to +120 |
| Working medium | EPDM: cold and hot water, air without impurities of oil and grease, other media neutral to the material |
| PTFE: water, alkalis, acids, solvents and oxidizers | |
| NBR: water, mineral oils, hydrocarbons, | |
| oils, fats | |
| Connection to pipeline | interflange |
Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Dimensions and dimensions of butterfly valves Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| DN | L, mm | ØC, mm | B1, mm | C, mm | E, mm | B, mm | H2, mm | H, mm |
| 40 | 33 | 110 | 153 | 30 | 72 | 56 | 110 | 77 |
| 50 | 45 | 125 | 174 | 36 | 89 | 76 | 162 | 77 |
| 65 | 48 | 145 | 174 | 36 | 89 | 89 | 175 | 77 |
| 80 | 49 | 160 | 174 | 36 | 89 | 89 | 175 | 77 |
| 100 | 55 | 180 | 216 | 46 | 109 | 114 | 200 | 77 |
| 125 | 58 | 210 | 216 | 46 | 109 | 127 | 213 | 77 |
| 150 | 59 | 240 | 279 | 55 | 134 | 140 | 225 | 77 |
| 200 | 64 | 295 | 308 | 67.5 | 157 | 177 | 260 | 77 |
| 250 | 70 | 355 | 405 | 76 | 174 | 203 | 292 | 77 |
| 300 | 80 | 410 | 405 | 76 | 174 | 242 | 337 | 77 |
Sketch Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Materials of butterfly valves Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| № | Name | Material |
| 1 | Body | Stainless steel AISI 316L |
| 2 | Cuff | PTFE |
| 3 | Disk | Stainless steel AISI 316L |
| 4 | Stem | Stainless steel AISI 316L |
| 5 | Stud | Stainless steel AISI 316L |
| 6 | Sleeve | PTFE |
| 7 | O-ring | NBR (nitrile) |
| 8 | plate | Carbon steel |
Sketch of parts and materials Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Technical data of PA-DA pneumatic actuators:
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of pneumatic valve 4V320-08 220V:
| Name | meaning |
| Type of pneumatic valve | slide valve |
| Working pressure, bar | 1.5 ÷ 1.8 |
| Supply voltage, V | 220 V |
| Total power, Va | 4.5 |
| Control | double-sided electromagnetic |
| Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-08 220V
Dimensions and dimensions of pneumatic valve 4V320-08 220V:
| Pneumatic valve model | 4V320-08 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 82.4 |
| P, mm | 24 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| V, mm | 4 |
| H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V
Technical parameters of limit switch unit APL-210N:
| Name | Value |
| Model of limit switch unit | APL-210N |
| Maximum voltage of limit switch, V | 250 |
| Working environment temperature, °C | -40 to +80 |
| Service life, years | 10 |
Limit switch unit APL-210N
Dimensions and dimensions of the APL-210N limit switch unit:
| Model | H, mm | L, mm | B, mm | D, mm | D1, mm | M |
| APL-210N | 77 | 112 | 88 | 10 | 5 | 20x1.5 |
Sketch of dimensions and dimensions of limit switch unit APL-210N
Avis (0)
Avis (0)
Limit switch unit ELEPHANT APL-210N
Pneumatic valve ELEPHANT 4V320-8 or 10 AC220V
Butterfly valve Elephant WBVx32x-2W-Fb-H DN40-300 16 bar
Pneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springsPaiement et sécurité
Moyens de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Questions fréquemment posées
Expédition
Dans quels pays expédiez-vous ?
Dans quels pays expédiez-vous ?
Nous proposons actuellement des livraisons en France et dans toute l'UE, ainsi que des options de livraison internationales. Si vous avez une destination spécifique en tête qui n'est pas répertoriée, n'hésitez pas à nous contacter pour plus d'informations.
Combien de temps faudra-t-il pour recevoir ma commande ?
Combien de temps faudra-t-il pour recevoir ma commande ?
L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).
Retours et remboursements
Comment retourner un produit ?
Comment retourner un produit ?
Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Combien de temps faudra-t-il pour recevoir mon remboursement ?
Les remboursements sont traités dans les 7 jours suivant la réception des articles.
