Vanne papillon d'eau Elephant WBV1631E-2W-Fb-H, matériau du corps - fo – Valve Elephant
1 9
Elephant  |  SKU : D050-30422

Vanne papillon d'eau Elephant WBV1631E-2W-Fb-H, matériau du corps - fonte QT450, matériau du disque - acier inoxydable AISI 304, joint - EPDM, actionneur pneumatique PA-SA avec ressorts de rappel, 4V320-10 220V, BKV APL-510N EX, BPV AFC2000

€605,55
Taxes incluses Frais de livraison calculés lors du paiement.

Livraison et expédition

Les frais de livraison sont déterminés lors du processus de paiement et varient en fonction de plusieurs facteurs, notamment le type de produit, le délai de livraison, le fournisseur de services et le pays de destination.

Si vous avez des questions sur nos produits, nos options de livraison ou toute autre chose, n'hésitez pas à nous contacter.

Description

Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.

Pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valves control process with maximum torque up to 2128 Nm.

Pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

Limit switch unit is an electrical device designed for opening and closing of the working circuit and for visualization of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the ACB it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

The air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain the pressure at the preset level, supply lubricant from the tank in the compressed air flow to the pneumatic system elements.

 

 

Technical parameters of Water Butterfly Valve Elephant WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000:

Name Significance
Nominal pressure PN, bar 16
Working medium temperature, °C from -20 to +150
Application water supply, heat supply
Connection to pipeline Interflange (threaded lugs)
Gate type swivel disk
Control type pneumatic actuator
Manufacturer's country China

Butterfly valves WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000:

DN H, mm A, mm E, mm I, mm B, mm C, mm
50 203 216 109 162 88 139
65 224 279 134 162 88 139
80 248 279 134 162 88 139
100 277.5 308 157 162 88 139
125 317.5 405 174 162 88 139
150 354.5 465 199 162 88 139

Sketch Butterfly valves WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000

 

 

Materials of butterfly valves Elephant WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000:

№ Details Material
1 Body cast iron QT450
2 Disk stainless steel AISI 304
3 Seat seal EPDM
4 Rod stainless steel SS 316

Sketch of parts and materials Butterfly valves WBV1631E-2W-Fb-H, body material - cast iron QT450, disk material - Stainless steel AISI 304, seal - EPDM, pneumatic actuator PA-SA with return springs, 4V320-10 220V, LSU APL-510N EX, ATU AFC2000

 

 

Technical data of PA-SA pneumatic actuators

Design with return springs
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range ± 5 ° for rotation at 0 ° and 90 °
Manual override is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts are anti-corrosion coated)

 

 

Materials of PA-SA pneumatic actuator parts:

№ Name Material
1 Enclosure extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

Material sketch of PA-SA pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-10 220V:

Name meaning
Type of pneumatic valve slide valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Total power, Va 4.5
Control double-sided electromagnetic
Frequency of operation, cycle/sec 5

Pneumatic valve 4V320-10 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-10 220V:

Pneumatic valve model 4V320-10
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

Sketch of dimensions and dimensions of pneumatic valve 4V320-10 220V

 

 

Characteristics of limit switch unit APL-510N-EX:

Parameter Significance
Enclosure all-weather IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices quarter-turn pneumatic actuators;
- any actuators with shaft rotation by 90
Full rotation angle 90°
Cable glands 2 x NPT 3/4”
Electrical connection screw terminals 8 points (0.08 - 2.5) mm2
Cable gland thread 2 x NPT 3/4”
Type of visual indicator two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors two mechanical switches two proximity sensors
Rated voltage, V 250
Rated current, A 16
Permissible ambient temperature, °C -20 to +66
Average life, cycles 10 000 000
Weight, kg 1.8

 APL-510N EX explosion-proof limit switch units

 

 

Overall and installation dimensions of APL-510N EX explosion-proof limit switch units:

A, mm 118
B, mm 118
C, mm 138.4
D, mm 17
E, mm 19
F, mm 7
G, mm 3
H, mm 4
I, mm 59
J, mm 59
K, mm 59
L, mm 59
M, mm 121.4
d1, mm 50
d2, mm 5

Sketch of dimensions of APL-510N EX explosion-proof limit switch units

 

 

Main parameters of the AFC2000 air treatment unit:

Operating pressure, bar 8
Maximum pressure, bar 10
Adjustable pressure range, bar 0,5 ÷ 9
Breaking pressure, bar 15
Air connection 1/4”
Operating temperature, C -5 to +60
Filter particle size, µm 40
Oil viscosity ISO VG 32
Weight, kg 0,395
Set composition filter-moisture separator, pressure regulator, lubricator, bracket

Air treatment unit AFC2000

 

 

Overall and installation dimensions of AFC2000 air treatment units:

A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Avis (0)

Documentation
nullAir treatment unit AFC2000 ELEPHANT
nullLimit switch unit ELEPHANT APL-510N EX explosion-proof
nullPneumatic valve ELEPHANT 4V320-8 or 10 AC220V
nullbutterfly valve Elephant wbv16xx-2w-fb-h dn50-150 pn16 lug
nullPneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Paiement et sécurité

Moyens de paiement

    Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

    Variantes disponibles

    SKU Taille de la connexionPressionPrix DisponibilitéQuantité Ajouter au panier
    D050-30422DN10016 bars €605,55 Épuisé
    D050-30423DN12516 bars €779,95 Épuisé
    D050-30424DN15016 bars €1.099,64 Épuisé
    D050-30419DN5016 bars €396,12 Épuisé
    D050-30420DN6516 bars €473,72 Épuisé
    D050-30421DN8016 bars €495,56 Épuisé

    Questions fréquemment posées

    Expédition

    Dans quels pays expédiez-vous ?

    Nous proposons actuellement des livraisons en France et dans toute l'UE, ainsi que des options de livraison internationales. Si vous avez une destination spécifique en tête qui n'est pas répertoriée, n'hésitez pas à nous contacter pour plus d'informations.

    Combien de temps faudra-t-il pour recevoir ma commande ?

    L'expédition standard prend normalement 3 à 7 jours. L'expédition le lendemain est disponible pour toutes les commandes nationales (moyennant des frais supplémentaires). Les délais d'expédition internationaux dépendent des produits et de la destination (estimés au moment du paiement).

    Retours et remboursements

    Comment retourner un produit ?

    Les articles doivent être retournés dans les 30 jours suivant la réception de votre commande. Les articles doivent être retournés dans le même état dans lequel ils ont été reçus, ne pas être portés/utilisés, avoir toutes les étiquettes encore attachées et inclure tous les emballages d'origine.

    Combien de temps faudra-t-il pour recevoir mon remboursement ?

    Les remboursements sont traités dans les 7 jours suivant la réception des articles.